Input Voltage:9.0-50 Volts
Max Input Current: <65 Amp
DC Charge Current Range: 70A@Syn. Mode – 40A@Asyn. Mode
Amps Discharge Current Range: 0.05 – 7.0 Amps
Maximum Charge Power Capacity: 2000W (Channel 1400W @input > 23.5V)
Maximum Discharge Power Capacity: 200W (Channel 130W)
Maximum Regenerative Discharge Capacity: 2000W (Channel 1400W)
Current Drain for Balancing: 2.4A@Syn. Mode 1.2A@Asyn. Mode
Balance Accuracy: <10mv
Lithium (LiPo/Lilo/Life) Battery Cell Count: 1-10 series (Per Channel)
NiMh/NiCd Battery Cell Count: 1-25 Series (Per Channel)
Pb (Lead Acid) Cell Count: 1-18 series 2-36v (Per Channel)
Battery Setup Memories: 64
Intelligent Temperature Control: Yes
PC Connect: USB Port
Weight: 1.47 Kg
Dimensions (LxWxD): 210x140x81
Input Voltage: 10-18 Volts
DC Charge Current Range: 0.05 – 10.0
Amps Discharge Current Range: 0.05 – 7.0 Amps
Maximum Charge Power Capacity: 300 watt at input voltage greater than 13.5 volt
Maximum Discharge Power Capacity: 30 watt
Current Drain for Balancing: <300ma
Balance Accuracy: <10mv
Lithium (LiPo/Lilo/Life) Battery Cell Count: 1-10 series
NiMh/NiCd Battery Cell Count: 1-25 Series
Pb (Lead Acid) Cell Count: 1-18 series (2-36v)
Battery Setup Memories: 10
Intelligent Temperature Control: Yes
PC Connect: USB Port
Weight: 410g
Dimensions (LxWxD): 143x97x26mm
Input Voltage: 10-18 Volts
DC Charge Current Range: 0.05 – 10.0
Amps Discharge Current Range: 0.05 – 7.0 Amps
Maximum Charge Power Capacity: 250 watt at input voltage greater than 13.5 volt
Maximum Discharge Power Capacity: 20 watt
Current Drain for Balancing: <300ma
Balance Accuracy: <10mv
Lithium (LiPo/Lilo/Life) battery cell count: 1-6 series
NiMh/NiCd Battery Cell Count: 1-17 Series
Pb (Lead Acid) Cell Count: 1-12 series (2-24v)
Battery Setup Memories: 10
Intelligent Temperature Control: Yes
PC Connect: USB Port
Weight: 350g
Dimensions (LxWxD: 138x83x25
Specifications:
Operating voltage range: DC10.0~20.0Volt
AC to DC adaptjor(DC10.0~20.0V/6A)
15V 6A is recommened, Pleas reduce charge current accordingly when adapter is less than 80W
Circuit power: Max.charge power 80W
Max.discharge power 10W
Charge current range: 0.1~6.0A
Discharge current range: 0.1~2.0A
Current drain for balancing Li-po: 300mAh/cell
NiCd/NiMH battery cell count: 1~15cell
Li-ion/Polymer cell count: 1~6series
Pb battery voltage: 2V~20V
Weight: 277g(Net Weight)
Dimensions: 133X87X33mm
Note: Power supply not included
Specifications:
350W powerful battery charger.
20A maximum charge current, discharge and battery cycle modes.
Handles 1-8 cell LiPo, Li-Ion, and LiFe (A123), 1-18 cell lead-acid, as well as 1-25 cell NiMH and NiCd batteries.
Built-in balancer for up to 8 cell LiPo, Li-Ion, or LiFe (A123) batteries.
Foam cut and motor drive modes.
Battery internal resistance measurement.
Support firmware upgrade via USB port.
Battery charge and discharge data can be recorded and analyzed with the free software.